Ceiling Lights Installing new Buy Ceiling Lights cosaerally improve the aesthetic appeal utilizaion of a room. The steps are very straightforward, whether you are replacing an existing fixture or installing a new lighting. This guide will walk you through installing anew; a safe python and enabling you to easily combine this with multiple applications.
Tools and Materials Needed
- Tools
- Flat-head and Phillips screwdrivers
- Voltage tester
- Wire stripper
- Measuring tape
- Ladder or step stool
- Drill and bits
- Pliers
- Materials
- Ceiling light fixture
- Light bulbs
- Wire nuts
- Electrical tape
- Mounting hardware [usually supplied with the fixture]
- Screws and Threats (in case of)
- Safety Precautions
Turn off the power: Always turn off the power to the circuit you'll be working on at the main electrical panel. The use of a voltage test tool to confirm there is no power supply to the range will ensure that the power is off during the repair process.
Use Safety Googles and Gloves to Avoid Hazards from Electricity
Always Use the Right Tool: Use the appropriate tool designed for that specific task so you do not break the fixture or hurt your hand.
Install a Logger with Express, Step by Step
Clean Space: Clean up the area from materials and loose tools so that you have a stable footing for where you place the tools and materials.
Step-ladder: Place a ladder or step stool securely in the installation zone.
KILL THE POWER: check for power with a voltage tester to make sure the power is off.
Unscrew the Light Bulb and Cover: Remove the light bulb and any decorative cover that may be on your existing fixture.
Remove the Fixture: Unscrew the fixture from the mounting bracket and carefully pull it down from the ceiling to expose the wiring.
Disconnect Wires: Disconnect the wires, paying attention to which wires were connected to each other (usually black to black, white to white and green or copper to ground).
Install the Mounting Bracket
Verify Junction Box: Make sure there is a junction box in the ceiling If not, you will have to set one up.
Fasten the Bracket: Use screws to mount the bracket (included with the ceiling light) to the junction box. Make sure it is securely connected to bear the weight of the fixture.
Prepare the New Fixture
Putting Together the Fixture: If your fixture requires parts to be assembled prior to installation then follow the manufacturer's directions.
Strip the Wires: Strip about 1/2 inch of insulation off the ends of the fixture's wires using a wire stripper.
Connect the Wires
Wire Nuts: connect the same coloured wires then secure with wire nuts. Make sure the wire nuts are fitted the connections hugging them tightly and there should be no visible wire.
After twisting them together: Wrap with Electrical Tape: Be sure to wrap electrical tape around the wire nuts.
Screw on the Fixture to the Ceiling
The Canopy: The wires should be pushed back into the junction box and then you can bolt the base of the fixture or the canopy onto the mounting bracket. Secure in place with the screws provided.
Screw Thoroughly: Check the screws and screw them well to hold the fixture.
Fit the light bulb and its cover
Put in the Bulb : Screw the light bulb into the socket Ensure you use one that works with the fixture and is the proper wattage.
The Cover: Apply the cover If your ceiling light has a cover or another cap, then top up it by keeping the user guide in your mind of the manufacturer.
Turn On the Power and Test
Bring The Power Back: Re-energize at The Main Panel of Your Electrical Panel.
Check the Lighting: then turn the light on to check if is operating properly and efficiently. If it does not, turn off the power and check ALL connections again.
Installation Tricks
Always Read the Instructions: Refer to the manufacturer instructions that come with your ceiling light to know in it just for instance.arange the finish.
Measure Twice: Confirm the fixture goes up at the right height and place
Ask for Help: If you are in doubt of any step, call an electrician or a handy friend to help.
Conclusion
The installation of ceiling lights is a satisfying thing when done right and add to the aesthetics of the room with their looks and functionality. This step by step tutorial will show you how to install ceiling lights and when you are careful and cautious you will have your new lights installed and connected them in no time and you will be admiring your new ceiling lights in no time as well. From living room ceiling lights and bedroom ceiling lights, to kitchen ceiling lights, and even hallway lights, ceiling lights have done it all.
Leave a comment
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.